Product Overview
Coats 1300 2D Direct Drive Wheel Balancer
The Coats 1300 is a dependable 2D wheel balancer designed for front-line passenger-car and light-truck service. It combines Coats' proven Direct Drive system with automatic distance and diameter entry, eight balancing modes, an easy-to-read LED interface, and Static-on-Screen® technology to give busy shops reliable balancing capability without unnecessary complexity.
The motor and spindle form a single pre-balanced assembly that remains calibrated to zero without belts or pulleys that wear over time. Automatic 2D data entry reduces manual measurements, while Behind-the-Spoke mode makes it easier to conceal adhesive weights behind decorative wheel spokes for a clean finished appearance.
Straightforward Balancing with Proven Direct Drive Reliability
- 2D automatic data entry: The measurement arm automatically enters wheel distance and diameter.
- Static-on-Screen®: View static and dynamic unbalance information at the same time.
- Behind-the-Spoke mode: Split and conceal adhesive weights behind decorative spokes.
- Broad service range: Handles 8-to-30-inch rims, tires up to 44 inches in diameter, and wheel assemblies weighing up to 150 pounds.
Key Features
Included Accessories
| Part Number | Included Accessory |
|---|---|
| 8112098 | Small A cone |
| 8112099 | Medium B cone |
| 8112100 | Large C cone |
| 8112101 | Light-truck back cone — D cone |
| 85607779 | Premium wheel-weight hammer |
| 8112106 | Small pressure cup and rubber lip |
| 8112107 | Spring |
| 8309011 | Calipers |
| 8112103 | Hub nut |
| 85608312 | No-mar ring |
| 8111935 | Light-truck Viper back-cone spacer |
Technical Specifications
| Application | Passenger car and light truck |
|---|---|
| Balancing Modes | 8 |
| Wheel Diameter Range | 8–30 in |
| Wheel Width Range | 2–20 in |
| Maximum Tire Diameter | 44 in |
| Maximum Wheel Weight | 150 lb |
| Shaft Diameter | 40 mm |
| Resolution — Round-Off Mode | 0.01 oz |
| Interface | LED |
| Automatic Data Entry | Distance and diameter |
| Electrical Requirements | 220V, single-phase or three-phase |
| Footprint (W × D × H) | 60 × 60 × 78 in |
| Shipping Weight | 639 lb |
| Warranty | 3 years parts; 6 months labor |
Available Configurations
| Electrical Configuration | Coats Part Number |
|---|---|
| 220V Single-Phase | 80013002D |
| 220V Three-Phase | 80013002D01 |
Before Ordering
Confirm whether your facility requires the single-phase or three-phase model, along with the available 220V electrical service, installation clearance, access route, and freight-unloading arrangements. Optional collets, pin plates, short cones, and specialty light-truck adapters are sold separately unless specifically included in the selected package.
